Engineered under our proprietary brand FILTORQ: Filtorq Guardson -56°C high-durability Red (Organic OAT) & Blue (Inorganic IAT) antifreeze formulations, along with 25 specialized technical aerosols designed for automotive workshops, detailing centers, and industrial facilities.
Providing four-season cooling and anti-boil protection in summer while preventing block cracking at temperatures as low as -56°C in harsh winter conditions.
Formulated with Organic Acid Technology (OAT), free of silicates, borates, and nitrites. Specifically designed for modern aluminum engine blocks, downsized turbocharged passenger cars, and light commercial vehicles.
Engineered with Inorganic Acid Technology (IAT) and fortified silicate inhibitors for cast iron and steel engine blocks, heavy trucks, and industrial cooling towers.
Due to its concentrated formulation, Filtorq Guardson can be diluted with pure deionized water to match your local climate. Deionized water is strongly recommended for maximum heat transfer and anti-scaling performance.
| Filtorq Antifreeze | Pure Water | Freezing Point | Protection Level |
|---|---|---|---|
| 100% (Pure) | 0% | -56 °C | Extreme Maximum |
| 50% | 50% | -38 °C | All-Season Standard |
| 40% | 60% | -28 °C | Standard Winter |
| 33% | 67% | -20 °C | Moderate Climate |
Delivering maximum solvent and penetrating lubrication power for mechanical repair workshops, detailing specialists, and industrial production plants.
Dissolves stubborn carbon deposits, varnish, resin, and gum in throttle bodies and carburetors in seconds.
Effortlessly dissolves road tar, bitumen, asphalt splatter, and tree sap from body paintwork, rocker panels, and wheels without harming clear coats.
Deep-cleaning expansive foam eliminating bacteria, fungi, and unpleasant musty odors from air conditioning evaporator coils and air ducts.
High-purity dielectric solvent removing oxidation, moisture, dirt, and flux residues from printed circuit boards, relays, switches, and wiring harnesses.
Removes carbon and lacquer from gasoline and diesel injector nozzles, restoring factory spray patterns and atomization efficiency.
Dissolves baked-on carbon soot and oily exhaust residues in Exhaust Gas Recirculation (EGR) valves and intake manifolds.
Applied directly through the sensor port to liquefy carbon and ash deposits without removing the particulate filter from the exhaust line.
Softens and lifts baked-on chemical gaskets, cured silicone sealants, anaerobic adhesives, and carbon from cylinder heads and oil pans.
Dissolves paper labels, window film residue, double-sided tape adhesives, and glue films from glass, metal, and plastic surfaces.
Heavy-duty degreaser designed to purge industrial machinery, gearboxes, bearings, and machined parts of heavy grease, oil, and swarf.
Cleans tire sidewalls, guards against ozone micro-cracking, and delivers a deep, long-lasting wet-look gloss that resists road grime.
Acid-free pH balanced cleaner removing baked-on brake dust, iron fallout, road film, and grime from alloy, chrome, and steel wheels.
Active foam penetrates fabric seats, headliners, door panels, and floor mats to lift coffee, grease, mud, and nicotine stains to the surface.
Cleans dashboards, center consoles, and rubber moldings, restoring a factory satin matte sheen while protecting against solar UV cracking.
Applied after car washing on wet or dry paintwork to produce deep mirror-like gloss and extreme hydrophobic water beading in minutes.
Thaws thick frost, snow, and stubborn ice from vehicle windshields, mirrors, door locks, and wiper blades within seconds.
Conditions door weatherstrips, sunroof rails, and rubber bushings; silences plastic squeaks, and prevents door rubbers from freezing shut in winter.
High-adhesion lubricant engineered for high-speed drive chains, forklifts, cranes, wire ropes, and industrial conveyor drives.
Sprays on as a thin penetrating liquid into tight clearances, then sets into an adhesive, water-resistant white grease within seconds.
Restores smooth, quiet retraction to sluggish or jamming seat belt mechanisms without leaving any residue on clothing.
Forms a durable protective barrier on plastic injection, die-casting, and stamping tooling against corrosion, humidity, and acid fumes during storage.
Instantly seals punctures up to 5 mm and re-inflates flat tubeless tires through the valve stem without wheel removal or jacking.
Prevents weld spatter from fusing to MIG/MAG torch nozzles, contact tips, fixtures, and adjacent workpieces during fabrication.
Ensures clean, effortless demolding without part distortion in plastic injection molding, polyurethane casting, rubber, and polyester fabrication.
Creeps into micro-fine threads and rusted crevices to free seized bolts, nuts, studs, and hinges without mechanical breakage.
Technical guidance on antifreeze selection, dilution ratios, and professional spray applications.
